Experimental study on mechanical properties of pumpkin tissue

Purpose: The purpose of this study was to calculate mechanical properties of tough skinned vegetables as a part of Finite Element Modelling (FEM) and simulation of tissue damage during mechanical peeling of tough skinned vegetables. Design/methodology: There are some previous studies on mechanical properties of fruits and vegetables however, behaviour of tissue under different processing operations will be different. In this study indentation test was performed on Peel, Flesh and Unpeeled samples of pumpkin as a tough skinned vegetable. Additionally, the test performed in three different loading rates for peel: 1.25, 10, 20 mm/min and 20 mm/min for flesh and unpeeled samples respectively. The spherical end indenter with 8mm diameter used for the experimental tests. Samples prepare from defect free and ripped pumpkin purchased from local shops in Brisbane, Australia. Humidity and temperature were 20-55% and 20-250C respectively. Findings: Consequently, force deformation and stress and strain of samples were calculated and shown in presented figures. Relative contribution (%) of skin to different mechanical properties is computed and compared with data available from literature. According the results, peel samples had the highest value of rupture force (291N) and as well as highest value of firmness (1411Nm-1). Research limitations/implications: The proposed study focused on one type of tough skinned vegetables and one variety of pumpkin however, more tests will give better understandings of behaviours of tissue. Additionally, the behaviours of peel, unpeeled and flesh samples in different speed of loading will provide more details of tissue damages during mechanical loading. Originality/value: Mechanical properties of pumpkin tissue calculated using the results of indentation test, specifically the behaviours of peel, flesh and unpeeled samples were explored which is a new approach in Finite Element Modelling (FEM) of food processes. Keywords: Finite Element Modelling (FEM), relative contribution, firmness, toughness and rupture force

Cell attachment on Ion-implanted titanium surface

Of outmost importance for the successful use of an implant is a good adhesion of the surrounding tissue to the biomaterial. In addition to the surface composition of the implant, the surface topography also influences the properties of the adherent cells. In the present investigation, ion implanted and untreated surfaces were compared for cell adhesion and spreading. The surface topography of the surfaces were analyzed using AFM and the cell studies with SEM. The results of our present investigation is indicative of the fact that ion implanted titanium surface offer better cell binding affinity compared to untreated/polished surface

Evidence based healthcare planning in developing countries: An Informatics perspective

Most of the national Health Information Systems (HIS) in resource limited developing countries do not serve the purpose of management support and thus the service is adversely affected. While emphasising the importance of timely and accurate health information in decision making in healthcare planning, this paper explains that Health Management Information System Failure is commonly seen in developing countries as well as the developed countries. It is suggested that the possibility of applying principles of Health Informatics and the technology of Decision Support Systems should be seriously considered to improve the situation. A brief scientific explanation of the evolution of these two disciplines is included

Recent Advances and Current Developments in Tissue Scaffolding

A bio-scaffold can be broadly termed as a structure used to substitute an organ either permanently or temporarily to restore functionality. The material that can be used varies with the application intended. Tissue engineering is one such application demanding certain requirements to be met before it is applied. One of the applications in tissue engineering is the tissue scaffold, which provides either a permanent or temporary support to the damaged tissues/organ until the functionalities are restored. A biomaterial can exhibit specific interactions with cells that will lead to stereotyped responses. The use of a particular material and morphology depends on various factors such as osteoinduction, osteoconduction, angiogenesis, growth rates of cells and degradation rate of the material in case of temporary scaffolds, etc. The current work reviews the state of art in tissue scaffolds and focuses on permanent scaffold materials and applications with a brief overview of temporary scaffold materials and their disadvantages

Determination of the financial impact of machine downtime on the Australia Post large letters sorting process

Machine downtime, whether planned or unplanned, is intuitively costly to manufacturing organisations, however is often very difficult to quantify. Costing processes are rarely undertaken within manufacturing organisations. It has previously been estimated that 80% of industrial facilities were unable to accurately cost downtime, with many facilities underestimating the total cost by a factor of 200-300% (Crumrine and Post 2006). It was also acknowledged that the lack of practical guides has hindered costing procedures of any nature being implemented more readily (Dale and Plunkett 1995). Models that did exist rarely considered more than a subset of the costs identified elsewhere, leading to overly conservative estimations. In addition, because cost definitions are not consistent, methodologies for evaluating and quantifying individual costs have not previously been adequately defined. The work outlined in this paper has aimed to develop the first comprehensive methodology for determining the cost of downtime, with particular application to the Australia Post's automated mail processing machines. The method presented may be applied to any manufacturing environment which would benefit from a more complete understanding of the magnitude of the cost of machine or process downtime

An advanced meshless technique for large deformation analysis of metal forming

The large deformation analysis is one of major challenges in numerical modelling and simulation of metal forming. Although the finite element method (FEM) is a well-established method for modeling nonlinear problems, it often encounters difficulties for large deformation analyses due to the mesh distortion issues. Because no mesh is used, the meshless methods show very good potential for the large deformation analysis. In this paper, a local meshless formulation is developed for the large deformation analysis. The Radial Basis Function (RBF) is employed to construct the meshless shape functions, and the spline function with high continuity is used as the weight function in the construction of the local weak form. The discrete equations for large deformation of solids are obtained using the local weak-forms, RBF shape functions, and the total Lagrangian (TL) approach, which refers all variables to the initial (undeformed) configuration. This formulation requires no explicit mesh in computation and therefore fully avoids mesh distortion difficulties in the large deformation analysis of metal forming. Several example problems are presented to demonstrate the effectiveness of the developed meshless technique. It has been found that the developed meshless technique provides a superior performance to the conventional FEM in dealing with large deformation problems in metal forming

Design of automatic vision-based inspection system for solder joint segmentation

Purpose: Computer vision has been widely used in the inspection of electronic components. This paper proposes a computer vision system for the automatic detection, localisation, and segmentation of solder joints on Printed Circuit Boards (PCBs) under different illumination conditions. Design/methodology/approach: An illumination normalization approach is applied to an image, which can effectively and efficiently eliminate the effect of uneven illumination while keeping the properties of the processed image the same as in the corresponding image under normal lighting conditions. Consequently special lighting and instrumental setup can be reduced in order to detect solder joints. These normalised images are insensitive to illumination variations and are used for the subsequent solder joint detection stages. In the segmentation approach, the PCB image is transformed from an RGB color space to a YIQ color space for the effective detection of solder joints from the background. Findings: The segmentation results show that the proposed approach improves the performance significantly for images under varying illumination conditions. Research limitations/implications: This paper proposes a front-end system for the automatic detection, localisation, and segmentation of solder joint defects. Further research is required to complete the full system including the classification of solder joint defects. Practical implications: The methodology presented in this paper can be an effective method to reduce cost and improve quality in production of PCBs in the manufacturing industry. Originality/value: This research proposes the automatic location, identification and segmentation of solder joints under different illumination conditions

An extensible manufacturing resource model for process integration

Driven by industrial needs and enabled by process technology and information technology, enterprise integration is rapidly shifting from information integration to process integration to improve overall performance of enterprises. Traditional resource models are established based on the needs of individual applications. They cannot effectively serve process integration which needs resources to be represented in a unified, comprehensive and flexible way to meet the needs of various applications for different business processes. This paper looks into this issue and presents a configurable and extensible resource model which can be rapidly reconfigured and extended to serve for different applications. To achieve generality, the presented resource model is established from macro level and micro level. A semantic representation method is developed to improve the flexibility and extensibility of the model

Static and dynamic strain sensing using a polymer : carbon nanotube film strain sensor

The search for new multipoint, multidirectional strain sensing devices has received a new impetus since the discovery of carbon nanotubes. The excellent electrical, mechanical, and electromechanical properties of carbon nanotubes make them ideal candidates as primary materials in the design of this new generation of sensing devices. Carbon nanotube based strain sensors proposed so far include those based on individual carbon nanotubes for integration in nano or micro elecromechanical systems (NEMS/MEMS) [1], or carbon nanotube films consisting of spatially connected carbon nanotubes [2], carbon nanotube - polymer composites [3,4] for macroscale strain sensing. Carbon nanotube films have good strain sensing response and offer the possibility of multidirectional and multipoint strain sensing, but have poor performance due to weak interaction between carbon nanotubes. In addition, the carbon nanotube film sensor is extremely fragile and difficult to handle and install. We report here the static and dynamic strain sensing characteristics as well as temperature effects of a sandwich carbon nanotube - polymer sensor fabricated by infiltrating carbon nanotube films with polymer

Analysis of fracture damage in silica optical fibers

Microstructured optical fibres (with a periodic transverse microstructure) are of interest since they offer a simple alternative to controlling the index profile of optical waveguides. Although many types of optical fibres and cables have been developed to meet the needs of communications service providers for longterm performance and reliable operation, the brittle nature, aging and fatigue of these fibres, remains to be the key materials issues. The flaws on the surface of fibres caused by processing (drawing) or subsequent assembling make the situation more complex. In this work, experimental investigation and fracture mechanics analysis have been conducted to understand the fracture behavior of these newly developed optical fibres. The results are believed to be useful for design, fabrication and evaluation of optical fibres for a variety of applications